The patented CPC 100 primary injection test system replaces several individual testing devices. This reduces the costs for training and transport, an

How CT Analyzer works- 1- Injects low test signals into secondary side of the CT 2- Determines the CT‘s equivalent circuit parameters 3- Identifies

COMPANO 100 is the universal and easy-to-use solution for all types of basic testing duties in electrical energy systems. Controlled electronic sourc

The CMC 256plus is the first choice for applications requiring very high accuracy. This unit is not only an excellent test set for protection devices

TESTRANO 600 is the world’s first portable, three-phase test system which supports all common electrical tests on single- and three-phase power and d

Mastering all the challenges of protection relay testing with just one test set and thus making an essential contribution to the energy system's reli

The CMC 430 is the preferred choice for test engineers in cases where excellent transportability is needed and three currents up to 12.5 A or six vol

MPC1 is a special protective transport case for our MPD 800 and UHF 800 partial discharge (PD) measurement devices. Its rugged design protects the PD

The Primary Test Manager™ (PTM) software supports you during diagnostic testing, condition assessment and data management of medium- and high-voltage

CIBANO 500 combines a micro-ohmmeter, timing analyzer, and a coil and motor supply. All important CB tests on all types of CBs can be carried out eve

TESTRANO 600 is the world’s first portable, three-phase test system which supports all common electrical tests on single- and three-phase power and d

The CMC 356 is the universal solution for testing all generations and types of protection relays. Its powerful six current sources (three-phase mode:

Mastering all the challenges of protection relay testing with just one test set and thus making an essential contribution to the energy system's reli

The UVS 610 allows partial discharge (PD) measurements to be conducted in UHF ranges with great sensitivity from inside the tank of liquid-insulated

The portable TANDO 700 system offers high-precision measurement of dissipation/power factor (Tan Delta) and capacitance for high-voltage laboratory t

The CPX 200 is designed to meet the demands of today and the challenges of tomorrow’s energy systems. Compact, powerful, and exceptionally safe, it s

Our UHF 800 system enables you to perform partial discharge (PD) measurement and analysis with high sensitivity in the ultra-high frequency (UHF) ran

The HGT1 is a handheld meter to measure ground impedance as well as step and touch voltages. Using the CPC 100 and CP CU1, test currents at variable

Analyze your current transformer (CT) with the push of a button How CT Analyzer works Injects low test signals into secondary side of the CT Determi

The patented CPC 100 primary injection test system replaces several individual testing devices. This reduces the costs for training and transport, an

For HV testing OMICRON’s CPC 100 + CP RC are directly connected to the voltage transformer of the GIS, forming a resonance circuit. This reinforced “

The EHB1 allows the connection of more than four EtherCAT®-compliant devices with CIBANO 500. Depending on the necessary number of EtherCAT® connecti

IOB1 – for timing measurement of larger circuit breakers The IOB1 offers six additional input and six additional output channels for CIBANO 500. Wha

MONCABLO is a customizable, permanently-installed system for the continuous on-line monitoring of partial discharge (PD) activity in the electrical i

The new SAA2 is a small, lightweight, and scalable safety accessory that helps you to mark your testing area and warn people that the prohibition zon

MPC1 is a special protective transport case for our MPD 800 and UHF 800 partial discharge (PD) measurement devices. Its rugged design protects the PD

We offer a variety of MCC coupling capacitors with various nominal voltage levels to meet your exact requirements for IEC 60270-compliant partial dis

The RBP1 is a rechargeable lithium-ion battery pack supplied with our measurement devices for up to 16 hours of continuous testing without the need f

The portable TANDO 700 system offers high-precision measurement of dissipation/power factor (Tan Delta) and capacitance for high-voltage laboratory t

The CB MC2 main contact module increases convenience and safety during tests with CIBANO 500. It also makes the dynamic contact resistance test possi

The CB TN3 acquires motion data. It consists of three analog and three digital channels for acquiring data from linear or rotary motion transducers.

TEV1 is a passive and broadband sensor which can be used to decouple transient earth voltages (TEV) or capacitively coupled signals from metal surfa

The UPG 620 generates fast pulses for testing the sensitivity of PD measuring circuits in gas-insulated switchgears (GIS), power transformers and pow

UCS1 is designed for reliable partial discharge (PD) measurement on high-voltage (HV) power cables. The sensor performs PD measurements in high-frequ

The UHT1 is a hatch-type UHF sensor for detecting partial discharge (PD) inside the tank of oil-paper-insulated transformers, which do not have an oi

The MCT 120 high-frequency current transformer (HFCT) is specifically designed for periodic partial discharge (PD) measurement and diagnostics on hig

It contains also a high precision Rogowski coil to measure the current reduction factor, e.g. of transmission towers. Including: 1x Rogowski coil w

The PDL 650 is an acoustic partial discharge (PD) localization system for pinpointing the location of insulation defects in power transformers. Even

The CP CR600 allows testing of the insulation quality of generators, motors and other systems with high capacitances up to 1 μF at rated frequency.

The MBB1 is a measurement balanced bridge used with our MPD 800 partial discharge (PD) measurement and analysis system for reliable differential PD m

The MCT 085 high-frequency current transformer (HFCT) is specifically designed for offline or online partial discharge (PD) measurement on medium-vol

MPD 800 universal partial discharge (PD) measurement and analysis system represents the next generation of our widely-used and innovative MPD PD test

RIV1 calibrator is used for the calibration of high-voltage partial discharge (PD) test set-ups on power, current and voltage transformers. It ensure

The patented CPC 100 primary injection test system replaces several individual testing devices. This reduces the costs for training and transport, an

PARADIMO 100 is a smart edge computing device that provides you with continuous monitoring and trending of partial discharge (PD) activity in Gas-Ins

The CP TD12 and CP TD15 are accessories for TESTRANO 600, CPC 100 for performing power/dissipation factor and capacitance measurements. The CP TD12

MONCABLO is a customizable, permanently-installed system for the continuous on-line monitoring of partial discharge (PD) activity in the electrical i

Our UHF 800 system enables you to perform partial discharge (PD) measurement and analysis with high sensitivity in the ultra-high frequency (UHF) ran

MONGEMO is a permanently installed, continuous on-line partial discharge (PD) monitoring system for one or multiple rotating machines, such as genera

Renewable energy systems such as wind energy plants often do not have battery arrangements for the provision of an auxiliary DC supply. In these inst

LLX3 provides low level outputs using standard 4 mm sockets. This makes LLX3 a flexible solution for further applications such as experimental setups.

The OTMC 100p antenna-integrated PTP Grandmaster Clock provides a quick and easy solution to time synchronize intelligent electronic devices, compute

TICRO 100 is a Precision Time Protocol (PTP) time converter that allows you to derive a high variety of time codes from IEEE 1588/PTP packages receiv

TWX1 is the ideal field-testing solution to test all functions of traveling wave protection relays. It is fully supported by the software RelaySimTes

VBO3 is a three-phase voltage transformer with a transformation ratio of 1:2 and extends the range of application of a CMC up to 600 V (L-N). Main fi

MTR2 is a matching transformer, allowing together with the CPC to perform induced voltage testing on dry-type and medium voltage transformer. With t

The CPL1 and CPL2 external quadripoles are designed to connect the MPD 800 partial discharge measurement device to a capacitance (coupling capacitor

The IEC 60270 standard requires verifying the test setup prior to conducting partial discharge (PD) measurements. To achieve this, the CAL 542 charge

The IEC 60270 standard requires verifying the test setup prior to conducting partial discharge (PD) measurements. To achieve this, the CAL 542 charge

COMPANO 100 is the universal and easy-to-use solution for all types of basic testing duties in electrical energy systems. Controlled electronic sourc

CMLIB REF6xx is an interface adapter for connecting ABB protection relays with sensor inputs (e.g. REF615 or REF601) to the low level outputs of CMC

The CPOL3 can be used as an accessory for several OMICRON test sets: CMC, COMPANO 100, CPC 100 and CT Analyzer It offers the following functionaliti

LLX2 provides a standard low level interface for controlling external amplifiers such as the CMS 356 and other low level accessories with a 16-pin LE

LLX1 is the ideal solution for testing protection and measurement devices with inputs for voltage and current sensors. A wide range of cables are av

The CT SB2 switch box is an accessory for the CT Analyzer which allows automatic testing of multi-ratio current transformers. It is connected to all

The MCU2 multi-device control unit is designed for connecting one or more MPD 800 partial discharge (PD) measurement devices to a PC. It converts opt

The patented CPC 100 primary injection test system replaces several individual testing devices. This reduces the costs for training and transport, an

MONTESTO 200 is a portable solution that enables you to perform temporary online partial discharge (PD) monitoring. You can use the IP65-rated soluti

The CPX 200 is designed to meet the demands of today and the challenges of tomorrow’s energy systems. Compact, powerful, and exceptionally safe, it s

Mastering all the challenges of protection relay testing with just one test set and thus making an essential contribution to the energy system's reli

COMPANO 100 is the universal and easy-to-use solution for all types of basic testing duties in electrical energy systems. Controlled electronic sourc

The CMC 256plus is the first choice for applications requiring very high accuracy. This unit is not only an excellent test set for protection devices

CMLIB A is used for connecting the low level signal outputs of a CMC for measurement or controlling purposes. It can also be used to connect the inpu

ISIO 200 is a simple and versatile binary I/O terminal with IEC 61850 interface. For communicating with CMC test sets and real-time message exchange

The CMGPS 588 synchronization unit is an antenna-integrated GPS controlled time reference. It is optimized for outdoor usage and works as a PTP ­gran

CMIRIG-B is an interface box enabling the connection of devices sending or receiving the IRIG-B protocol or PPS signals with CMC test sets. CMGPS 588

The CMLIB 7Sx8 is an interface adapter for connecting SIEMENS protection relays fitted with sensor inputs (e.g. SIPROTEC 7SJ81) to the low level outp

The CMC 356 is the universal solution for testing all generations and types of protection relays. Its powerful six current sources (three-phase mode:

Our MPD 800 universal partial discharge (PD) measurement and analysis system represents the next generation of our widely-used and innovative MPD PD

CMControl P is a control option for CMC test sets, specially designed for the quick manual testing of protection and measurement devices. Due to it

DANEO 400 is a hybrid measurement system that records and analyzes all conventional signals (voltages, currents, hard wired binary status signals) an

The CMC 310 is specifically designed for basic three-phase testing of protection and measurement devices. It is operated by the CMControl P software

The CMS 356 is a voltage and current amplifier for analog low-level signals provided by a CMC test set or by any other signal source, such as a digit

The CMC 850 is a protection test set dedicated to IEC 61850. It focuses on the real-time communication methods GOOSE and Sampled Values to interface

The CMLIB 7Sx8 is an interface adapter for connecting SIEMENS protection relays fitted with sensor inputs (e.g. SIPROTEC 7SJ81) to the low level outp

The CMC 356 is the universal solution for testing all generations and types of protection relays. Its powerful six current sources (three-phase mode:

CIBANO 500 combines a micro-ohmmeter, timing analyzer, and a coil and motor supply. All important CB tests on all types of CBs can be carried out eve

The CMC 356 is the universal solution for testing all generations and types of protection relays. Its powerful six current sources (three-phase mode:

The CMC 256plus is the first choice for applications requiring very high accuracy. This unit is not only an excellent test set for protection devices

How CT Analyzer works Injects low test signals into secondary side of the CT Determines the CT‘s equivalent circuit parameters Identifies all releva

The CMC 430 is the preferred choice for test engineers in cases where excellent transportability is needed and three currents up to 12.5 A or six vol